The Sooner Model A Club Of Oklahoma

Sooner Model A Club Of Oklahoma

Model A Tech Tips

 
Sort: Recent | Popular Grid List
  • Model A Motor Time Lapse Rebuild
    by Editor on September 19, 2019 at 10:22 AM
    74 Views - 0 Comments

    Half the cylinders, half the work? If only! The flathead four-cylinder engine in our “Swap to Street” 1930 Ford Model A was leaking oil like crazy and wasn’t running particularly well, either. That made it a perfect subject for our popular Redline Rebuild time-lapse video series. What took us months of long days in the shop is distilled down to a high-paced video that captures EVERY part of the rebuild process. Get caught up on the details of this build and past builds with our Redline Updates: https://bit.ly/2m4LFqF Wondering where this car came from? We built it! In four days… From parts at a swap meet! Check out that time-lapse video here: https://www.youtube.com/watch?v=w59vo...

  • Model A Rear Brake Seminar
    by Editor on September 10, 2019 at 2:50 PM
    63 Views - 0 Comments

    Very good and detailed description of the Model A Rear Brakes.

  • Brake Seminar
    by Editor on September 10, 2019 at 2:47 PM
    63 Views - 0 Comments

    Bob Guimarin giving the Sonora A's members a lesson on Model A brakes.

  • Model A Transmission Assembly
    by Editor on April 23, 2019 at 12:45 PM
    223 Views - 0 Comments

    George Bell goes thru assembly of the Ford Model A Transmission.

  • Ford Model A Transmission Parts Inspecti...
    by Editor on April 23, 2019 at 12:44 PM
    186 Views - 0 Comments

    An excellent tutorial for inspecting Model A Transmission parts prior to rebuild.

  • Ford Model A Transmission
    by Editor on April 23, 2019 at 12:26 PM
    206 Views - 2 Comments

    Excellent 14 minute video on the Model A Transmission.

  • New Cast Iron Model A Block
    by Editor on July 20, 2016 at 11:22 PM
    1602 Views - 0 Comments

    This video show the first new cast iron block for the Model A. Todd Buttermore has been machining high compression heads for the major vendors for years and now has turned his talents to the first new block in years.

  • Here are the new 6:1 Aluminum heads firs...
    by Editor on December 8, 2015 at 7:28 PM
    1920 Views - 0 Comments

    Pretty excited to see these new aluminum heads for the Model A.

  • Riding the film
    by Editor on November 30, 2015 at 4:17 PM
    1363 Views - 0 Comments

    This is a great video from 1937 on engine lubrication.

  • Model A Piston Slap Noise
    by Editor on January 12, 2015 at 11:23 AM
    2002 Views - 0 Comments

    From the Cape Henry Model A Club. Attached is a video of a Model A engine with Piston Knock in #4 cylinder. Notice the noise abruptly stops when the #4 spark plug is grounded. The #4 piston and rod were removed and wrist pin and crank clearances were found to be well with in tolerances. Could be an exhaust leak, but that hasn’t been checked. Grounding the spark plugs with an insulated screw driver is a good method for tacking down Model A engine knocks.

  • Great song on starting a Model A
    by Editor on January 18, 2014 at 11:47 PM
    1664 Views - 1 Comment

    There's a skill that I'm afraid is about to slip away...

  • Installing a gas gauge in a Ford Model A...
    by Editor on November 16, 2013 at 7:58 PM
    1833 Views - 0 Comments

    Here is a nice video of installing a gas gauge in a Model A Ford.


1 - 12 of 13 Videos